HOME » INDUSTRIAL » ROBOTICS SERVICES » SOLUTIONS FOR WATER SUPPLY ESTABLISHMENTS

SOLUTIONS FOR WATER SUPPLY ESTABLISHMENTS

CLOGGING DETECTION/CLEANING/TANK SLUDGE REMOVAL


In todays world the need for the uptime required for a power plant is all time high. No power plant can afford to lose time in prolonged maintenance.

The critical parts of the boiler needs to be maintained and inspected on a regular basis apart from various other hazardous tasks needed to be carried out in lowest time possible.

Boiler tubes need regular inspection for thickness, corrosion and any operational flaw caused.Storage tanks needs regular cleaning and many other assets needs regular inspection for their healthy operational needs.

Manual processes would be quite cumbersome and risky to be executed which limits their applicability.With Gridbots NDT Robotic Systems and Operations fleet - Power plants world wide can conduct almost all the inspection and related process with full safety and precisely minimising the risks associated.

Please connect with us to know more about how our robotic systems can help you to maximise the efficiency of your plant operations and minimise the risk associated substantially.



CORROSION MAPPING

MFL Inspection

Tube thickness mapping

HD VISUAL INSPECTION

LASER 3d Profiling

HYDRO JETTING OF TUBES

TANK SLUDGE Removal & cleaning, without Tank shutdown


Pipe cleaning & Thickness Monitoring





OUR PRODUCT FLEET-ROBOTS



GRIDBOTS STINGER WHEEL DRIVE

PIPE OPERATION ROBOT


Stinger-WD is a pipeline operations robot which can be used to inspect and perform operations inside the pipelines.

It operates in the pipes of sizes ranging from 50 mm to 5000 mm in diameter and can operate in variety of material of pipes.

The robot can work in extreme environments and it IP68 rated .It can carry various tooling inside the pipelines for welding, cutting, grinding, lapping and inspection operations.

It has twin Full HD camera units with LED illuminators which ensure that the operation can be monitored from various angles with utmost visibility.

The robot can work both in completely auto and manual modes with multitude of sensors and actuators on board.



GRIDBOTS STINGER TRACK BASED

PIPE OPERATION ROBOT


Stinger is a pipeline operations robot which can be used to inspect and perform operations in various sizes of pipes ranging from 50 mm to 5000 mm in diameter of any material.

The robot can work in extreme environments and it IP68 rated.It can carry payloads ranging from 1 Kg to 500kg inside the pipelines both vertically and horizonatally. The robot comes equipped with twin water proof HD camera's and 3D sensing scanner to build pipe profiles in 3D in realtime.

The robot can work both in completely auto and manual modes and can be used for grinding, painting, welding ,cutting,lapping or retreival operations from the pipelines.





GRIDBOTS SPYDER

MAGNETIC CRAWLER


Gridbots Spyder series of robots are desgigned to be used in vertical and inclined pipe inspection and operations jobs.

It has the capabilities to climb almost all kind of magnetic pipe surface with a payload upto 5 kgs in most extreme temperature and surface conditions. The robot can be used for surface inspection, weld inspection, blasting, painting, coating, grinding, lapping or many other operations where it is difficult for a human worker to reach. The robot is ultra light construction from aircraft grade aluminum and high strength magnets to adhere to the surface with active distance compensation force multipliers underneath the body..

The robot is internally powered by strong PMSM geared motors,pedometer and 6 DOF IMU sensor to track the motion in all 6 DOF. It also features distance offset sensor beneath its surface to keep a constant distance maintaned from the surface.

The robot has an array of 10 EMAT/USONIC sensors to measure the tube thickness and report it in real-time to the base computer- where a depth profile of pipes can be composed for later analysis



Gridbots TUBESCAN

WATERWALL ROBOT


Gridbots Magneto series of robots are desgigned to be used in vertical and inclined waterwalls of powerplant boilers.

It has the capabilities to climb almost all kind of magnetic surfaces with a payload upto 50 kgs in most extreme temperature and surface conditions. The robot can be used for surface inspection, weld inspection, blasting, painting, coating, grinding, lapping or many other operations where it is difficult for a human worker to reach. The robot is ultra light construction from aircraft grade aluminum and high strength magnets to adhere to the surface with active distance compensation force multipliers underneath the body.

The robot is internally powered by strong PMSM geared motors,pedometer and 6 DOF IMU sensor to track the motion in all 6 DOF. It also features distance offset sensor beneath its surface to keep a constant distance maintaned from the surface.

The robot has an array of 10 EMAT/USONIC sensors to measure the tube thickness and report it in real-time to the base computer- where a depth profile of pipes can be composed for later analysis.



FLOORSCAN

MFL SCANNER


Gecko series of robots has the capabilities to climb almost all kind of magnetic surfaces with a payload upto 10 kgs in most extreme conditions. The robot can be used for surface inspection, weld inspection, blasting, painting, coating, grinding, lapping or many other operations where it is difficult for a human worker to reach. The robot is ultra light construction from aircraft grade aluminum and high strength magnets to adhere to the surface with active distance compensation force multipliers underneath the body.

The robot is internally powered by strong geared motors and pedometer sensor to track the motion in all the directionsIt also features distance measurement sensor beneath its surface to keep a constant distance maintaned from the surface.



HYDRO BLAST

BLASTING ROBOT


Gridbots Hydro Blast series of robots are desgigned to be used in vertical and inclined waterwalls of powerplant boilers.

It has the capabilities to climb almost all kind of magnetic surfaces with a payload upto 50 kgs in most extreme temperature and surface conditions. The robot can be used for surface inspection, weld inspection, blasting, painting, coating, grinding, lapping or many other operations where it is difficult for a human worker to reach. The robot is ultra light construction from aircraft grade aluminum and high strength magnets to adhere to the surface with active distance compensation force multipliers underneath the body.

The robot is internally powered by strong PMSM geared motors,pedometer and 6 DOF IMU sensor to track the motion in all 6 DOF. It also features distance offset sensor beneath its surface to keep a constant distance maintaned from the surface.

The robot has an array of 10 EMAT/USONIC sensors to measure the tube thickness and report it in real-time to the base computer- where a depth profile of pipes can be composed for later analysis.